RochesterRecruiter Since 2001
the smart solution for Rochester jobs

Electrical Engineering / Audio

Company: Cameron Craig Group
Location: Rochester
Posted on: September 13, 2019

Job Description:


Electrical Engineer--Rochester, NY--







  • Responsible for the design and development of digital/Analog/Audio hardware designs for radio products.
  • Performs significant engineering Digital/Analog/Audio design tasks, detailed experimental testing, operational test and fault isolation on radio products.--
  • Evaluates results to assist in development and problem resolution.--
  • Responsible for designing, developing, modifying and evaluating electronic parts, components or circuitry for radio products in the areas of design tasks. Determines design approaches and parameters.----
  • Analyzes electrical requirements to determine feasibility of design within time and cost constraints.-- Determines selection of components and equipment based on analysis of specifications and reliability.
  • Performs electrical and/or mechanical debug/troubleshooting to determine cause of problems in radio equipment.--
  • Uses test and diagnostic equipment to evaluate radio products performance.--
  • Documents designs and test results.-- Provides detailed test reports.--
  • Updates and maintains Engineering documentation includes schematic capture of designs.--
  • Provides support for tactical handheld and manpack radios, power amplifiers and accessories in a manufacturing environment.--
  • Responsible for the design and development of digital/Analog/Audio hardware designs forradio products.
  • Performs significant engineering Digital/Analog/Audio design tasks, detailed experimental testing, operational test and fault isolation on radio products. Evaluates results to assist in development and problem resolution.--
  • Responsible for designing, developing, modifying and evaluating electronic parts, components or circuitry for radio products in the areas of design tasks. Determines design approaches and parameters.----
  • Analyzes electrical requirements to determine feasibility of design within time and cost constraints.-- Determines selection of components and equipment based on analysis of specifications and reliability.
  • Performs electrical and/or mechanical debug/troubleshooting to determine cause of problems in radio equipment.--
  • Uses test and diagnostic equipment to evaluate radio products performance.--
  • Documents designs and test results.-- Provides detailed test reports.--
  • Updates and maintains Engineering documentation includes schematic capture of designs.--
  • Provides support for tactical handheld and manpack radios, power amplifiers and accessories in a manufacturing environment.--
  • Diagnose, troubleshoot, and resolve highly complex technical issues with radio products experienced by customers.--
  • Develops new design concepts, techniques, and standards.
  • Assists with guiding highly complex and advanced projects to completion.
  • Provides mentoring of lower level engineers
  • Proficiency with test equipment such as oscilloscopes, spectrum analyzers, etc.
  • Provides technical presentations on projects (Design Reviews, etc.)
  • Provides estimates on development costs.----
  • Strong working knowledge of Digital, Analog, and Audio circuit design.

    Qualifications--

  • Bachelor's Degree and a minimum of 6 years of prior electrical engineering experience, or a Graduate Degree and a minimum of 4 years of prior electrical engineering experience

    Preferred Skills

  • Experience with high speed memory interfaces.
  • Experience with high speed serial protocols (PCI Express, SRIO, Ethernet).
  • Experience with Analog to Digital (AD) and Digital to Analog (DA) interfaces.
  • Experience with control protocols such I2C, SPI, RS-232/422.
  • Self-motivated individual with the ability to work and communicate effectively within a development group.
  • Excellent troubleshooting skills, well organized, detail oriented
  • Adaptable
  • Able to work in cross-functional team environment of varying disciplines.
  • Ability to work in a cross functional team environment and negotiate solutions with Hardware / Software Engineering and Systems Engineering.
  • Knowledge of radios and communication systems.
  • Knowledge of firmware and embedded software.
  • Proficient in the use of test equipment (Spectrum Analyzer, Oscilloscope).
  • Proficient in the use of Design simulation tools
  • Labview programming.




    --
    --
    --



Keywords: Cameron Craig Group, Rochester , Electrical Engineering / Audio, Engineering , Rochester, New York

Click here to apply!

Didn't find what you're looking for? Search again!

I'm looking for
in category
within


Other Engineering Jobs


Workforce Management Engineer
Description: The OpportunityWho We Are br br At Delaware North we are driven by our vision to delight guests by creating the world's best experiences today while reimagining tomorrow. Founded and owned by the (more...)
Company: Delaware North
Location: Buffalo
Posted on: 09/18/2019

Associate Engineer, Gas Planning and Design Engineering
Description: About usThe role holder will be required to contribute to the overall goals of National Grid's Gas Corrosion Control Programs in the Upstate NY region. Responsible tomaintainpublic safety, cost reductions, (more...)
Company: National Grid
Location: Syracuse
Posted on: 09/15/2019

Sr. Engineer, DevOps
Description: Job Title br Sr. Engineer, DevOps br br Requirements br br Job Responsibilities br br Architect, build, maintain, document, and automate technical processes and operations in alignment (more...)
Company: NextGen Healthcare
Location: Rochester
Posted on: 09/18/2019


Sales Engineer
Description: Kelly Engineering has a great Sales Engineer position with a leading company in Rochester NY -- Inside Technical Sales Engineers are the primary technical resource for the field sales force, and are (more...)
Company: Kelly Services
Location: Rochester
Posted on: 09/17/2019

Assoc, Electrical Engineer (New College Grad - Rochester, NY
Description: Job Title: Electrical Engineer New Grad-Melbourne, FL Job Code: Job Location: Company Description:L3Harris is dedicated to recruiting and developing diverse, high-performing talent who are passionate (more...)
Company: L3Harris
Location: Rochester
Posted on: 09/14/2019

Co-Op - Automation Engineering
Description: Rich s has been able to pull off something rare in the business world: a culture that successfully blends the latest business practices with family values. That means our associates are able to work (more...)
Company: Rich Products Corporation
Location: Buffalo
Posted on: 09/18/2019

Test Automation Engineer
Description: Who we are:KeepTruckin is on a mission to modernize the trucking industry. With the leading fleet management platform, we are bringing trucks online and fundamentally changing the way freight is moved (more...)
Company: KeepTruckin
Location: Buffalo
Posted on: 09/13/2019

Tier 3 Support Engineer, Hardware
Description: Who we are:KeepTruckin is on a mission to modernize the trucking industry. With the leading fleet management platform, we are bringing trucks online and fundamentally changing the way freight is moved (more...)
Company: KeepTruckin
Location: Buffalo
Posted on: 09/13/2019

Senior Process Development Engineer, Breakthrough Innovation - Buffalo
Description: Headquartered in the United States, Rich's is a family owned, global food company dedicated to inspiring possibilities. From cakes and icings to pizza, appetizers and specialty toppings, our products (more...)
Company: Rich Products Corporation
Location: Buffalo
Posted on: 09/15/2019

Senior Cyber Security Engineer
Description: Our Exciting Work EnvironmentThis position will be based out of Delaware North's new global headquarters, a state-of-the-art, 12-story, mixed-use building in downtown Buffalo, N.Y. The headquarters facility, (more...)
Company: Delaware North
Location: Buffalo
Posted on: 09/18/2019

Log In or Create An Account

Get the latest New York jobs by following @recnetNY on Twitter!

Rochester RSS job feeds